Motion Automation
Motion Automation
Rajkot, Gujarat
GST No. 24ABCFM6850D1ZI
TrustSEAL Verified
Call 08048087716 80% Response Rate
SEND EMAIL

Stepper Motor & Driver

Offering you a complete choice of products which include leadshine dm542 digital stepper motor driver, dma860e digital stepper driver, dm1182 leadshine digital stepper drive, dma860h microstepping stepper drive, 86hs85 nema 34 leadshine hybrid stepper motor and 86cm120 nema 34 leadshine hybrid stepper motor.

Leadshine DM542 Digital Stepper Motor Driver

Leadshine DM542 Digital Stepper Motor Driver
  • Leadshine DM542 Digital Stepper Motor Driver
  • Leadshine DM542 Digital Stepper Motor Driver
Get Best Quote
Approx. Price: Rs 2,950 / UnitGet Latest Price
Product Brochure

Product Details:

Input Voltage50 VDC
Model NumberDM542
Phase4 Phase Motors
BrandLeadshine
Max. Output Current4.2 A
Pulse Frequency (KHz)300 KHz
Operating Temperature-10 to 50 degree C
Length (mm)118 mm
Width (mm)75 mm
Height (mm)33 mm
Weight (gm)255 gm

The Leadshine DM542 Digital Stepper Motor Driver is an economical micro-stepping driver based on the patented technology of Leadshine. It is suitable for driving 2-phase and 4-phase hybrid stepping motors.

By using the advanced bipolar constant-current chopping technique, it can output more speed and torque from the same motor, compared with traditional drivers, such as L/R drivers. Its 3-state current control technology allows coil currents to be well controlled and with relatively small current ripple, therefore less motor heating is achieved.

The DM542 is a fully digital stepper driver developed with advanced DSP control algorithm based on the latest motion control technology. It has achieved a unique level of system smoothness, providing optimal torque and nulls mid-range instability. Its motor auto-identification and parameter auto-configuration feature offer a quick setup to optimal modes with different motors.

Compared with traditional analog drives, DM542 can drive a stepper motor at the much lower noise, lower heating, and smoother movement. Its unique features make DM542T an ideal choice for high requirement applications. We highly recommend this to work as NEMA 17 driver and NEMA 23 driver.

Features:

  1. Extremely cost-effective
  2. Good high-speed performance
  3. Automatic idle-current reduction
  4. 3-state current control technology
  5. Self-adjustment technology
  6. Pure-sinusoidal current control technology
  7. TTL compatible and optically isolated input
  8. 15 selectable resolutions in decimal and binary, up to 25,600 steps/rev
  9. Suitable for 2-phase and 4-phase motors
  10. DIP switch current setting with 8 different values
  11. Support PUL/DIR and CW/CCW modes
  12. Short-voltage, over-voltage, over-current protection
Request
Callback
Yes! I am Interested

DMA860E Digital Stepper Driver

DMA860E Digital Stepper Driver
  • DMA860E Digital Stepper Driver
Get Best Quote
Approx. Price: Rs 3,700 / UnitGet Latest Price
Product Brochure

Product Details:

Model NumberDMA860E
WeightApprox. 510 gm
BrandLeadshine
Output CurrentUpto 7.2 A
Minimal Pulse Width2.5 mm
Minimal Direction Setup5.0 m
Isolation Resistance500 Mohm
Max. Supply Voltage80 VAC/ 110 VDC
Max. Logical Signal Current16 mA
Pulse Input Frequency200 kHz
Storage Temperature-20 to 65 degree C

Features of Leadshine Digital Stepper Drive DM Series - DMA860E:

  • Anti-Resonance for optimal torque, smooth motion, low motor heating and noise
  • Motor auto-identification and parameter auto-configuration for optimal torque from wide-range motors
  • Step & direction (PUL/DIR) and CW/CCW (via internal jumper set) control. Step & direction by default Multi-Stepping for smooth motor movement
  • Opto Isolation for input control signals
  • Input voltage 18-80VAC or 24-110VDC
  • 16 selectable micro-step resolutions of 400-51,200 via DIP switches
  • 8 selectable output current settings of 2.4 – 7.2A via DIP switches
  • Soft-start with no “jump” when powered on
  • Pulse input frequency up to 200 KHz. TTL compatible and optically isolated inputs
  • Automatic idle-current reduction
  • Protections for over-voltage and over-current
Request
Callback
Yes! I am Interested

DM1182 Leadshine Digital Stepper Drive

DM1182 Leadshine Digital Stepper Drive
  • DM1182 Leadshine Digital Stepper Drive
Get Best Quote
Approx. Price: Rs 10,150 / UnitGet Latest Price
Product Brochure

Product Details:

Model NumberDM1182
Input PhaseSingle Phase
ColorBlack
BrandLeadshine
Max. Output Current8.2 A
Max. Supply Voltage150 V AC/ 212 V DC
Max. Logic Signal Current20 mA
Pulse Input Frequency200 kHz
Min.Isolation Resistance500 Mohm

Features:
  • Extra-low motor noise offers excellent quietness
  • Anti-Resonance, provides optimum torque and nulls mid-range instability
  • Self-test and Auto-configuration technology, offers optimum responses with different motors
  • Microstep resolutions programmable, from full-step to 102,400 steps/rev  
  • Supply voltage up to 150 VAC  
  • Output current programmable, from 0.5A to 8.2A 
  • Pulse input frequency up to 200 KHz  
  • Automatic idle-current reduction 
  • Supports PUL/DIR and CW/CCW modes
Request
Callback
Yes! I am Interested

DMA860H Microstepping Stepper Drive

DMA860H Microstepping Stepper Drive
  • DMA860H Microstepping Stepper Drive
Get Best Quote
Approx. Price: Rs 5,520 / UnitGet Latest Price
Product Brochure

Product Details:

Input VoltageUp to +80VAC or +110VDC.
Model NumberDMA860H
Input PhaseSingle Phase
BrandLeadshine
Output Current7.2 A
Isolation Resistance500 Min
Minimal Pulse Width2.5 Min
Pulse FrequencyUpto 300 KHz
Operating Temperature70 degree C
Power Supply20-30 VDC, Including voltage fluctuation and EMF voltage.

The DMA860H Microstepping Stepper Driveis a high performance microstepping drive based on pure-sinusoidal current control technology. Owing to the above technology and the self-adjustment technology (self-adjust current control parameters) according to different motors, the driven motors can run with smaller noise, lower heating, smoother movement and have better performances at higher speed than most of the drives on the markets. It is suitable for driving 2-phase and 4-phase hybrid stepping motors
Request
Callback
Yes! I am Interested

86HS85 NEMA 34 Leadshine Hybrid Stepper Motor

86HS85 NEMA 34 Leadshine Hybrid Stepper Motor
  • 86HS85 NEMA 34 Leadshine Hybrid Stepper Motor
Get Best Quote
Approx. Price: Rs 4,900 / UnitGet Latest Price
Product Brochure

Product Details:

Step Angle1.8 Degree
BrandLeadshine
Phase2 Phase
Weight3.5 Kg
Rotor Inertia2.7 kg-cm2
Axial PlayMax 0.08 mm with 900g load
Radial PlayMax 0.02 mm with 450g load
Shaft TypeSingle
Shaft Size0.5 inch
Inductance4.25 mH
Number of WiresFour
Number Of LeadsEight
ConectionParallel, Series, Unipolar
Unipolar Current4.9 A
Unipolar Holding Torque6.0 Nm
Length118 mm
NEMA SizeNEMA 34
Model Number86HS85 NEMA 34

Features:
  • 2 phase 1.8? stepping angle
  • NEMA 34
  • Holding toque of 8.5 N*m (1203 oz-in)
  • High precision
  • Smooth movement
  • Low motor heating
  • Low movement noise
  • The 86HS85 two-phase stepper motor is suitable for a wide range of motion control applications. Terminated with 8 motor leads, the motor can be connected in a few different ways, including bipolar series , bipolar parallel and unipolar.
Request
Callback
Yes! I am Interested

86CM120 NEMA 34 Leadshine Hybrid Stepper Motor

86CM120 NEMA 34 Leadshine Hybrid Stepper Motor
  • 86CM120 NEMA 34 Leadshine Hybrid Stepper Motor
Get Best Quote
Approx. Price: Rs 6,000 / UnitGet Latest Price
Product Brochure

Product Details:

Voltage4.5 V
BrandLeadshine
PhaseTwo
Weight4.5 Kg
Operating Temperature-10 - 50 degree C
Step Angle1.8 degree C
Rotor Inertia2.94 kg-cm2 (0.04163 oz-in-sec2 )
Accuracy+-0.9 degree C
Length129 mm
Number of WiresFour
Phase Current6 A/Phase
Resistance0.75 ohm
Inductance5.3 mH
Shaft Size14 mm
Shaft TypeSingle
Temperature RiseMax. 80 K
Model Number86CM120 NEMA 34

Features:
  • 2 phase, NEMA 34 frame size
  • 129 mm (5.08 inch) long
  • 6 A phase current
  • 12 N.m (1700 oz-in) holding torque
  • 14 mm (0.551 inch) shaft size
  • Built with high quality materials including bearings and shaft made by Japanese manufacturers
  • High precision, low motor heating, and low vibration
Request
Callback
Yes! I am Interested
X

Explore More Product

View All Product


Reach Us
Chirag Vala (Partner)
Motion Automation
3- Lohanagar, Opp. Shah Roadways, Gondal Road
Rajkot - 360002, Gujarat, India


Call Us


Send E-mail